Get In Touch

Our Partner, TrigasFI has performed more than 100,000 gas and liquid flowmeter calibrations over the past 30 years. We are one of few laboratories able to calibrate with actual viscosities and real fluids. So we are ensuring high performance calibrations which are representative of actual operating conditions. Thanks to our experience, you can be sure that your flow meter will be optimally calibrated and adjusted. A properly calibrated device can save the cost of investing in new hardware.

Certified Quality
Liquid flowmeter calibrations – Our partner TrigasFI is DAkkS ISO 17025 accredited and can provide DAkkS certification for practically all Gas and Liquid flowmeter calibrations performed in our lab.
Service Center for Flowmeters
Our technicians are factory trained to perform Calibrations of Flowmeters, Electronics programming and scaling as well as most mechanical and electrical repairs. Fast turnaround and compliance to factory specifications is guaranteed.

Ranges and Specifications for Standard Liquid Flowmeter Calibrations:

Piston/Displacer Primary Standards

Oils and Water:

• 0.00005 l/min (0.05 ml/min) to 1500 l/min
• 0.00004 kg/min (0.04 gr/min) to 1500 kg/min
• Accuracy: +/- 0.03% (0.04% with DAkkS certificate)
• Viscosity range: 0.5-2000 mm²/s

Mass Flow Loop, Water only:

• up to 5000 l/min – 5000 kg/min
• Accuracy: +/- 0.05% (0.09% with DAkkS certificate)

Our partner, TrigasFI performed more than 100,000 liquid and gas flowmeter calibrations over the past 30 years. We are one of few laboratories able to calibrate with actual viscosities and real gases. Therefore, we are ensuring a performance which is representative of actual operating conditions. Thanks to our experience, you can be sure that your flow meter will be optimally calibrated and adjusted. A properly calibrated device can often replace having to invest in new hardware.
Certified Quality
Gas Flowmeter Calibrations – Our Partner TrigasFI is DAkkS ISO 17025 accredited and can provide DAkkS certification for practically all Liquid and Gas Flow calibrations performed in our lab. Specialty flow instruments and one-of-a-kind devises are tested routinely at TrigasFI. The list includes test leaks, Vehicle Body Leak systems, Aircraft and Industrial Gas Turbine components, etc.
Ranges and Specifications for Standard Gas Flowmeter Calibrations:
We calibrate with air and real gases(*) on our Sonic Nozzle test stand, laminar flow element test stands or our bell provers.
Exact pressure and temperature compensation is carefully carried out and taken into account in the evaluation algorithms.
*- Practically any non-hazardous gas can be used for calibration including Helium, Argon, Nitrogen, Methane, Propane, etc. There are flow range limitations due to practical reasons, so please contact our technical experts for details.
Volumetric Flow:

• 0,1 ml/min to 20.000 Nl/min
• Accuracy: +/- 0.26% … 0,.35% of reading

Mass Flow:

• 1,3 mg/min to 2400 kg/min
• Accuracy: 0,24% … 0,35% of reading